[Elecraft] final test part 3

[Christophe F8ACF-56]

Good evening to all,


I made emissions there fore the results of measurements tests:

views of K2 RX dummy load, and ditto TX

3.750MHZ =>RX 13.2V ; 220mA / TX 11.6V; 2.06 A for 10W
3.750MHZ=> RX 13.2V ; 220mA / TX 11.4V; 1.62 A for 5W
7.100mhz => RX 13.2V ; 220mA / TX  11.9V; 1.85A for 10W

7.100mhz => RX 13.2V ; 220mA / TX  11.4V; 1.38A for 5W
10.100mhz => RX 13.2V ; 220mA / TX  11.3V; 2.10A for 10W
10.100mhz => RX 13.2V ; 220mA / TX  11.4V; 1.52A for 5W
14.100mhz => RX 13.2V ; 220mA / TX  11.3V; 1.98A for 10W
14.100mhz => RX 13.2V ; 220mA / TX  11.4V; 1.48A for 5W
18.100mhz => RX 13.2V ; 220mA / TX  11.3V; 2.00A for 10W
18.100mhz => RX 13.2V ; 220mA / TX  11.4V; 1.62A for 5W
21.100mhz => RX 13.2V ; 220mA / TX  11.5V; 2.38A for 10W
21.100mhz => RX 13.2V ; 220mA / TX  12.3V; 1.60A for 5W
24.900mhz => RX 13.2V ; 220mA / TX  11.6V; 2.22A for 10W
24.900mhz => RX 13.2V ; 220mA / TX  11.9V; 1.70A for 5W
28.200mhz => RX 13.2V ; 220mA / TX  11.5V; 2.28A for 10W
28.200mhz => RX 13.2V ; 220mA / TX  11.9V; 1.70A for 5W


the external power meter is accurate to 10 and 5 W,
for handling "CW" is reached modulated between 7 & 8 Watts external power meter.

Thank you for giving me your advice to a newbie trying to do his best.

K2# 7369 in progress

73 , Christophe F8ACF