[Elecraft] KPA500 not working

[VE3NFK]

My KPA500 has been working - but had the intermittent hum issue;

I took it apart; checked the nut tension; checked I had used the yellow
wire;
reassembled (including the lock-out switch - at least it was all there) 
and now it won't transmit.

Gets the pa key  as an asterix shows up to the left of the frequency;
it follows the K3; the K3 is fine;  The K3 reports it on/off/standby etc.

Heeeellllpp  :-)

thanks  73  
John VE3NFK 



--
View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-not-working-tp7572838.html
Sent from the Elecraft mailing list archive at Nabble.com.