[Elecraft] FOLLOW UP: K3 Power problem: won't shut down and blank screen on power on
Ken Nicely
ken at nicelyweb.com
Fri Apr 12 05:49:21 EDT 2013
I had this same issue about a week ago. I did call Electraft and they
asked me to remove the cover and check some voltages. I knew the problem
had started when I was messing around with the rs232 connections, so I
thought I would undo the changes before I started working on the radio.
I think in my case it was a bad usb to rs232 converter because once I
eliminated the second connection to the amp the issue disappeared. I have
not had time to try a different converter yet.
Ken (KC) Nicely KE3C
On Thu, Apr 11, 2013 at 9:09 PM, Hunsdon Cary III <h3cary at gmail.com> wrote:
> F/Up on power problem: My KAT500 is powered separately with a SEC-1223.
> When I turned the SEC-1223 on to activate the KAT500, my K3 display
> suddenly came to life and the power button works again - go figure!
> 73,
> Cary, K4TM
>
>
> On Apr 11, 2013, at 9:01 PM, Hunsdon Cary III <h3cary at gmail.com> wrote:
>
> > Elecrafters: Tech support at Elecraft is closed at the moment. I had a
> nice QSO with W0YY a few minutes ago and when I went to shut down the K3,
> the "Power" button did not work. Tried pushing it from a variety of
> angles, no dice. I powered down by turning my Astron RS-35M off - that did
> the trick! After supper, I sat down for some 40 meter fun and, lo and
> behold, the power button worked BUT the display is BLANK…no K4TM welcoming
> message….TOTALLY BLANK!
> > Any ideas before Elecraft tech support comes on line for me about noon
> tomorrow?
> > Tnx & 73,
> > Cary, K4TM
> > Lynchburg VA
> > Elecraft K3-100 #3448, KAT500 #144, KPA500 #698
> > h3cary at gmail.com
> >
> >
> >
>
> H. Cary III
> h3cary at gmail.com
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list