[Elecraft] P3 SVGA; chars randomly omitted during Tx

[Richard Fjeld]

Thanks for the prompt reply, Paul.

My comment/question about the cable was a passing thought about having the cable plugged into the correct one of two jacks.  I just verified that it is.

The transmit mode is set up for ^T.  Perhaps this is normal, but no matter what mode, it begins to transmit as soon as I call a memory.  Using ^T it also transmits when I begin typing unless I use a ^R.  After using a ^R, I can then use a ^T to have it transmit.

In summary, the memories were being transmitted as soon as I called them.

Rich, n0ce

  ----- Original Message ----- 
  From: Paul Saffren N6HZ 
  To: elecraft at mailman.qth.net 
  Sent: Monday, April 08, 2013 2:21 PM
  Subject: Re: [Elecraft] P3 SVGA; chars randomly omitted during Tx


  Hi Richard, 

  For sending CW from the keyboard on the SVGA the only cable that needs to be
  connected is the serial cable between the K3 and the P3.   How do you have
  the transmit mode set up?  Does it transmit immediately (vox) or is it CR? 

  73, 

  Paul
   



  --
  View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-chars-randomly-omitted-during-Tx-tp7572341p7572350.html
  Sent from the Elecraft mailing list archive at Nabble.com.
  ______________________________________________________________
  Elecraft mailing list
  Home: http://mailman.qth.net/mailman/listinfo/elecraft
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Elecraft at mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html