[Elecraft] Setting up B rcvr for split

[Bob K6UJ]

Don,
OK,  then I can set up B to a different BW filtering than A, great.

I would like to duplicate all settings (including NB/NR) to the B first then I could open up the BW on B a little for CW split.

Today I was trying to work VK9CZ on Cocos Keeling and he was pretty weak,  and naturally my once in a while power line noise 
came on.  Turned on the NB on A rcvr and it knocked it down very nicely and I could copy  him fine.  Then listening up to find a hole in the 
pileup on B, the NB wasnt on so couldnt hear very much.  I decided to camp out at 2KHz up and finally managed a QSO without using rcvr B.
Gotta do this better  :-)

thanks for the info Don, I will play with the settings some more.

Bob
K6UJ




On Apr 7, 2013, at 7:35 PM, Don Butler wrote:

> Bob, yes you can have settings on each VFO different ..... activate B Set
> (hold A/B button) and it will allow you to adjust all settings for the B VFO
> ...
> 
> Don, N5LZ
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bob K6UJ
> Sent: Sunday, April 07, 2013 8:21 PM
> To: Elecraft Reflector
> Subject: [Elecraft] Setting up B rcvr for split
> 
> I asked this question some time back on the forum but I cant find the thread
> in my search.
> I am missing something I need to do.
> When I am working split I want the B rcvr to be set up the same as my A
> rcvr.   (I have identical filters in each)
> I press A/B button so they are the same then tune up in freq with the B rcvr
> to listen to the pileup. 
> They are set up the same except the NB setting is not on the B rcvr.
> How do I apply the NB setting to the B rcvr also ?
> 
> Also can I have different filter bandwidths set for each rcvr, for instance
> 25hz on A and 250 on B ?
> 
> I promise I will keep the answers this time !  :-)
> 
> 
> Bob
> K6UJ
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>