[Elecraft] KIO2 commands for KDSP2 filter

[Don Wilhelm]

Enzo,

Yes, there are no direct commands to change the KDSP2.  You will have to 
do it as you have outlined with the SW commands emulating actual button 
taps and holds for the KDSP2 and if you want to see the results, the DS 
command is the way to do it.

The KDSP2 was originally designed by a 3rd party (who is now an Elecraft 
employee), so the method of accessing the DSP menu was an 'add on' to 
the normal K2 menu system.

I do not know of any software application that can directly control the 
KDSP2 option.

73,
Don W3FPR

On 4/4/2013 12:46 PM, iw7dmh wrote:
> Good evening,
>
> I was wondering if I can change DSP2 filter settings through the KIO2 cat
> commands.
> Since there are no dedicated commands to control DSP2 filter, I suppose the
> only way is to set the emulation mode (SW command) and then use the DS
> command to read the filter status on the display.
> Can you confirm that this is the correct way or can you suggest me a work
> around mode?
> Also, are there (possibly free) software that can control K2-DSP2 filters?
>
>