[Elecraft] Dunstar Question - ANSWERED - Thanks
Dick, WN3R
wn3r.us at gmail.com
Tue Apr 2 12:17:47 EDT 2013
Thanks, Dick.
Dummy me opened the tuner first and posted my question after reading its
manual. Had I opened the AMP box first, I would have had my answer as I
found the Y cable. Perhaps,
there should a mention of the Y cable in the Tuner manual as well.
Thanks again for your help. My plan is to remote the whole thing with
the K3/0 which is still in the box. I have some work to do on my old
Remote Rig boxes that are now connected to the IC-706.
73, Dick, WN3R
On 4/2/2013 11:58 AM, Dick Dievendorff wrote:
> If your K3 is now providing band data to your Dunestar, it probably is using
> a band decoder from the four BAND lines on the K3 ACC connector.
>
> The Elecraft KPAK3AUX cable set
> (http://www.elecraft.com/manual/KPAK3AUX%20Cable%20Set%20Instructions.pdf)
> includes a Y connector that enables you to connect the KAT500/KPA500 as well
> as another device (your existing band decoder) to the K3's back panel ACC
> connector.
>
> Be careful when selecting a Y connector; some sold for VGA monitors may not
> have all 15 pins connected as you would expect.
>
> 73 de Dick, K6KR
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dick, WN3R
> Sent: Tuesday, April 02, 2013 7:34 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Dunstar Question
>
> Current configuration: K3 ---> Dunstar ---> Alpha 87A
>
> New configuration: K3 ---> Dunstar ---> KPA 500 ---> KAT500
>
> Question: How do I control the the band switching on the Dunstar? Is there a
> way to parallel the Dunstar from the K3 Acc? If not, which is better?
> Disconnect the Amp Aux or the Tuner Aux?
>
> This is an SO2R station. Second station is: K3---> Dunstar ---> ACOM 2000A
>
> 73, Dick, WN3R
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list