[Elecraft] KAT3 addition to K3 question

[Cady, Fred]

Hi Randy,
It will work great. You just have to put the KAT3 into bypass.
Cheers and 73,

Fred KE7X

Fred Cady
"The Elecraft K3: Design, Configuration and Operation Second Edition"
www.ke7x.com

fcady at ieee dot org

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Randy Diddel
> Sent: Monday, April 01, 2013 1:34 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] KAT3 addition to K3 question
>
> Here is my setup at the QTH:  K3>KPA500>KAT500.  All work seamlessly
> together.  I am considering bringing the K3 out into the field for the
> upcoming NM QSO party.  My K3 does not currently have an internal KAT3
> but I am considering purchasing one. My question *should* be simple.
> If I disable the internal tuner (via menu), will the functionality I
> enjoy return? In other words will the K3 pass commands back to the
> KAT500 through the AUX bus? Or, will I have to remove the KAT3 internal
> tuner once the K3 returns to the shack?
>
> Yes, I know that I could take the KAT500 out into the field as well,
> but I want to pack light and make the setup process as simple as
> possible.
>
> Thanks and 73
>
> K5RHD
>
> /randy
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html