[Elecraft] No Comp or ALC in SSB

[Don Wilhelm]

Cliff,

All Prosets are not the same.  If it is a Proset-K2 or a Proset-iC (with 
an electret element), turn bias on and try again.
If it is a Proset-HC4 or HC5 (dynamic element, bias should be off), the 
output level is quite low, so you may have to set the mic gain quite high.

73,
Don W3FPR

On 4/1/2013 12:39 PM, ke0cp wrote:
> Am I missing something or is there a problem when setting transmit mic level
> (ALC) and compression in USB and LSB modes on my KX3?
>
> I'm using a Heil Proset, get audio in the earphones while speaking into the
> mic but cannot get any indication on either level meters no matter what CMP
> or MIC levels I use. I have the latest firmware update installed.
>
>   
>