[Elecraft] Can't get 160 sub working on K3

[iain macdonnell - N6ML]

Hi Gary,

It sounds like your KRX3 filters are not configured correctly - and so
at some bandwidth range(s), you're selecting a slot that has no filter
in (or perhaps a bad or improperly installed filter). You should be
able to see the XFIL display change (to indicate which slot is
selected) as you adjust the bandwidth.....

73,

    ~iain / N6ML


On Fri, Sep 28, 2012 at 6:50 PM, Gary Smith <Gary at ka1j.com> wrote:
> Thanks for the folks that answered. After futsing around with the
> settings I now have the solution to this specific dilemma:
>
> I have three filters in the sub and when I entered B Set and played
> with the different knobs, I found when I narrowed the filter width,
> there came a point where the sub was working as it should be. This
> was the solution to the problem and now the sub is working properly
> on all bands and so is diversity.
>
> I'm sure this is mentioned in the manual somewhere but I never found
> it.
>
> Hopefully this will help others who have this same problem come up.
>
> Gary
> KA1J
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html