[Elecraft] K3 - help rtty pro sign "IM" end of xmt

[Dick Dievendorff]

You can put this into a CW memory with the K3 or KX3 Utility.  Use the
vertical bar character | where you want an IM sent. It has no effect when
the memory is sent in CW.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bruce Beford
Sent: Monday, September 24, 2012 3:54 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 - help rtty pro sign "IM" end of xmt

Robert, Keep in mind that it IS a prosign. That is, it should be sent with
NO SPACING between the "I" and the "M" So, di-di-dah-dah with NO SPACING.
The K3 internal CW keyer is not very forgiving in this regard. I think many
people who have reported difficulty recording the CW memories from the
paddle can attest to this.

GL es 73,
Bruce, N1RX



> I have tried sending this pro-sign with all variations of speed, 
> spacing, etc. However, it's very hit and miss. Most of the time the 
> transmission times out on its own. Every now and then, randomly it seems,
the "im"
> works and the transmission ends immediately. Most of the time, no. Any 
> suggestions? Thanks.



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html