[Elecraft] New beta K3 firmware!

[Gary Gregory]

*Joe,

Thanks for taking the time to conduct the tests.

Now that I understand what the rationale for the request to Wayne, I am of
the same mind also.

As I use the FM filter rarely I would also be able to free up a filter slot
and add an additional narrow filter which would be good for me also.

I hope Wayne will give consideration to your request in light of your
testing and implement it soon.

Thanks again Joe for the test results and the reasoning for the request.

73
*
On 23 September 2012 08:02, Thomas Horsten <thomas at horsten.com> wrote:

> Hi Joe,
>
> Thanks for that analysis! It makes the situation clear to me: The FM filter
> will do just fine for AM and ESSB, and I can free up a filter slot for a
> narrow CW filter.
>
> Wayne, it would be great to have this option. I hardly ever use ESSB or AM
> TX, so I can't really justify having a filter just for that if it means I'm
> missing out a on 200Hz CW filter that would be really useful at times.
>
> 73, Thomas M0TRN
>
> On 22 September 2012 15:23, Joe Subich, W4TV <lists at subich.com> wrote:
>
> > In an attempt to quantify this wideband transmit noise, I set up the
> > K3 on the test bench with a dummy load, directional coupler, some
> > attenuators, another receiver and the SDR-IQ.  The directional coupler
> > provided a 1 dBm signal with 100W from the K3.
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
*Gary*
*Start the day off slow, then taper off.........*
K3 #679
KPA500FT #18
KAT500FT 007
P3 #1629