[Elecraft] W1UE: Re: K3 & Remote Rig Questions

[Dennis]

Thanks for the Reply.  Your tip on the K3 was almost right on- I
found that all you have to do is turn the AF to minimum while
the Control K3 is off.  Then, when you turn it on, the Control K3
reads the minimum setting and the audio from it never comes on.

I tried the RRT; and RRN; using a CAT command in N1MM.  Neither
seems to work, and both lock up the Control K3 and I have to
power cycle it to restore it.  I also don't see those commands
documented anywhere.

Dennis W1UE

On 9/19/2012 11:29 AM, Brandon Hansen [KG6YPI] wrote:
> Hello Dennis,
>
> Yes, there is a serial port command to switch the radio between 
> Terminal and Normal mode. ("RRT;" and "RRN;")
>
> It is recommended to have both volumes knobs turned all the way down 
> when powering down the remote and control K3. This way on power up, 
> you will not have excessive audio coming from the remote and the 
> control K3 will already be muted.
>
> I hope this information helps.
>