[Elecraft] K1 building problem - VFO not working

[Gordon LaPoint]

For those interested in this problem, it turned out to be one of the cap's in the LO.  
C5, C11 and C12.  I changed all three and now the LO is working correctly.  Turns out it 
was oscillating, just on the wrong frequency, 7.8Mhz, which I did not see until I lifted 
R5 and Q9 to unload the LO.

Thanks for the help, especially from Don, W3FPR and Elecraft for shipping me new parts, 
rapidly and at no cost!
Now on to finishing the kit!

Gordon - N1MGO

On 21 Aug 2012 at 17:28, Gordon LaPoint wrote:

> I also have a K1 that I'm building, with the same error code - no LO.  I'm interested in
> any of the possible solutions!
> 
> Thanks!
> 
> Gordon - N1MGO
> 
> On 20 Aug 2012 at 13:34, Stan AE7UT wrote:
> 
> > For those of you following this thread with bated breath.
> > 
> > I did check the resistors and the transistor in the VFO.
> > They were right.... well at least the transistor was the one supplied with
> > the kit.
> > Apparantly the Q1-2N4124 was switched with a ZVN4424 in the parts supplied.
> > 
> > The right one is on the way from Elecraft so I think that will fix it.
> > We shall see.
> > 
> > Stan AE7UT
> > 
> > 
> > 
> > 
> > 
> > --
> > View this message in context:
> >
> http://elecraft.365791.n2.nabble.com/K1-building-problem-VFO-not-working-tp7561287p75613
> > 50.html
> > Sent from the Elecraft mailing list archive at Nabble.com.
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html