[Elecraft] HL-45B with KX3

[NM6E_QRP]

What setting did you use for the ACC2 output to connect to the amp?

TX-Low? (ground to key amp?)

I have been meaning to try it with my Acom 1011 amp as that is also a TX Low setting here at the home QTH in Dallas. 

I am buying a friends HL-200BDX that's sitting in his closet in the Bay Area to use in the Cal QSO Party from San Francisco in a few weeks with the KX3 driving it to about 180 watts with 10 watts drive (theoretically).  

Let me know!

Javier NM6E/5


Please excuse any mis-spelling 

Sent from my iPhone

On Aug 15, 2012, at 11:02 PM, "Bill Conkling"<nr4c at widomaker.com> wrote:

> I'm using a 50B, works well.
> 
> 
> ...bill nr4c 
> Sent from my Verizon Wireless Droid
> 
> -----Original message-----
> From: Doug Person <k0dxv at aol.com>
> To: elecraft at mailman.qth.net
> Sent: Thu, Aug 16, 2012 02:39:43 GMT+00:00
> Subject: [Elecraft] HL-45B with KX3
> 
> I just received my KX3 kit.  Once built, I intend to try it with my 
> Tokyo Hy-Power HL-45B amplifier.  I get an easy 50 watts out with my 
> FT-817.  I wonder if anyone else has tried this?
> 
> 73, Doug -- K0DXV
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html