[Elecraft] KPA500 won't key on 17M

[TG9AJR]

Gary,

Good point !
Yes this happen to me while trying to work split and running between RTTY, SSB and CW.

Juan
TG9AJR


On Sep 12, 2012, at 6:02 PM, Gary Gregory <garyvk4fd at gmail.com> wrote:

> *I wonder if the original request for information was a result of having
> CW+SSB turned ON, AND the K3 was in split?
> 
> I just checked and mine does the same thing.
> 
> With split active, CW+SSB does not allow the K3 to TX, the Red LED remains
> OFF but the SPlit indicator LED is lit and the K3 LCD displays SPLIT.
> 
> Just a thought, but I don't recall having read that restriction in the
> manual.
> 
> The same occurs on all bands of course, 17M may have been used in split
> when trying to contact NH8S?
> 
> 73
> *
> -- 
> *Gary*
> *Start the day off slow, then taper off.........*
> K3 #679
> KPA500FT #18
> KAT500FT 007
> P3 #1629
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html