[Elecraft] K3: external VFO control

[Fred Smith]

I would be interested in that also if it were available.

73,
Fred/N0AZZ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Edward R Cole
Sent: Wednesday, September 12, 2012 1:32 AM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] K3: external VFO control

I guess this might be considered a subject covered by remote operation of
the K3, but I have a specific need to be able to control VFO-A in my K3 from
another sw program.

I am implementing MAP65 vs 2 which performs JT65 over a 90-KHz bandspan
decoding every JT65 signal in the 90-KHz window, simultaneously.  MAP65 has
the ability to also transmit JT65 on a specific frequency (but that requires
frequency control of the radio).  MAP65 currently is built to control
SoftRock, FUNcube, SDR-IQ, IQ+. and WSE.  I will be writing Joe K1JT about
adding the K3 to that list and he may need details on how to control the K3
VFO.

This application to the K3 is not just a benefit to me as there are several
K3 owners that utilize JT65 and would use MAP65, as well.  I should explain
that MAP65 is primarily designed for eme use on VHF (this has no particular
application to JT65HF).

73, Ed - KL7UW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html