[Elecraft] KPA500 Question

[Jack Brindle]

Make sure you set the menu parameter RADIO to BCD. The Band Change parameter should work just fine with the Yaesu.
Let me know if you continue to have problems with this.

Jack Brindle, W6FB
Elecraft Engineering

On Sep 8, 2012, at 5:46 PM, Joe Hutchens <aj8mh-radio at charter.net> wrote:

> I just finished building the KPA500 and have it interfaced to my Yaesu 
> FT-950.  The KPA500 follows the 950 band changes and keys fine. 
> However, I have changed menu item "Band Change" to "STBY" from "NOR" 
> which should automatically switch the amp to STBY from OPER after a band 
> change.  Is this option just for the K3 or is there a software glitch in 
> the amp?
> 
> Thanks,
> Joe Hutchens  ( AJ8MH )
> http://webpages.charter.net/aj8mh-radio/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html