[Elecraft] 472KHz/500KHz

[Edward R Cole]

It would be even easier if one could use a 10MHz IF for LF. For this the K3
and KX3 (when the code is written) xverter settings could be set to
XVRF=0MHz XVIF=10MHz. This way the accurate 10MHz reference, already applied
to the reference input to the K3 could be used as the local oscillator in
the external transverter

Dave

G4fre

------------
Dave,

This is exactly what I am planning.  I already have a low-level mixer 
that does this.  My amplifier drives with 0.1 mw )-10 dBm) so 
basically all I need is to provide for Rx.  I have a +/-5E-12 OCXO on 
10-MHz with +10 dBm for LO injection.  For the K3 running in TEST 
mode it is a natural.  KX3 may not allow operation outside ham bands?

73, Ed - KL7uW