[Elecraft] K3 no power out on DATA

[vk4tux]

Mike , What I am wondering now is how line in adj helped you, as when when I
suggested that you look at line in level earlier, you said you are using FP
front mike for input?

Adrian ... vk4tux







"Adrian, Thanks for the input. I got the Beta firmware, downloaded

set up and running so am good for the moment. Just cannot get

the output up on RTTY Data. I am using a front mount mic selection

but my mike goes to a rigblaster duo it does all this house keeping.

The radio keys up and goes into transmit. My set up for the Kwood

mike works in the rigblaster on all the other modes Digital etc. So

I have audio into the mic input from my computer through the

rigblaster on the other modes to the K3. Leave it to me to disable

something obsure. Thanks again es 73 for now.

 

 

 

                        Mike Sanders 

                             KØAZ

       

 

-----Original Message-----
From: Adrian Fewster [mailto:a.fewster at pf.uq.edu.au]
Sent: Tuesday, September 04, 2012 16:53 PM
To: k0az at centurytel.net
Subject: RE: [Elecraft] K3 no power out on DATA

“comp is at zero. Line level was set up and adjusted
up some. I do not remember the level right now but I
did get to it. However I am set up for FP mic and have
it up all the way. Output on USB is good and very low
output on Data. Data sounds good in another receiver
and on monitor but no output to speak of. Thanks



                    Mike Sanders
                        KØAZ”

 

 

Mike , You are using a mic or front mic socket to bring in the audio from
the pc? Not using the line in on back of k3?"





--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-no-power-out-on-DATA-tp7562151p7562158.html
Sent from the Elecraft mailing list archive at Nabble.com.