[Elecraft] K3 no power out on DATA

[Joe Subich, W4TV]

The K3 stores input selection (mic - front | rear, or
line) and mic level/line level on a per mode and per
band basis.  Have you set up the input and mic/line
levels correctly in DATA A/AFSK A on each band?

73,

    ... Joe, W4TV


On 9/4/2012 4:31 PM, Mike Sanders wrote:
> Well, Only days old here the new K3 is still challenging
> me. Lots of fun without doubt. Anyway I am running MMTTY
> and using AFSK in the data mode. Everything looks good
> but no output. I tried shifting to USB/LSB and output is as
> set on power control. Tones on monitor and another RX
> sound good as well. But again when in data mode I get
> no/very low output. Power is set at about 50W and I get
> that in USB. Any thoughts on what I am missing here?
> Thanks es 73, Mike
>
>
>                      Mike Sanders
>                          KØAZ
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>