[Elecraft] [K3] problem with Transmitter Gain Calibration

[kj4raq at comcast.net]

Problem: 

  



The transmitter gain will not calibrate. Receive an error code: 

  



Starting 5 watt calibration 

Calibrating at 1.900 MHz 

Calibration power settled at " 0.0 W ;" 

Elapsed time: 6 seconds 

Tx Gain calibration failed because transmit power did not reach the expected value 

5 watt calibration failed 



Radio is a new build. Checking out at low power. Installed the 100 watt power amplifier, then removed the amplifier to test at low power per book instructions. I have reinstalled the PA jumper block for all test runs. 



The radio will not receive Hz filter and it is properly configured. 



Is there anything else I need to do to get back to low power configuration? 


Warren, KJ4RAQ