[Elecraft] K3 DNR

[Fred Smith]

Thank you Frank for your help and I am finished also wish I had never posted
sorry.

73,
Fred/N0AZZ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of W6NEK
Sent: Sunday, September 02, 2012 8:18 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 DNR

For anyone following this post, does Abbot and Costello's "Who's on first"
routine ring any bells?

I'm done, now back from  whence I came,
Frank - W6NEK

----- Original Message ----- 
  From: Gary Gregory 
  To: W6NEK 
  Cc: elecraft at mailman.qth.net 
  Sent: Sunday, September 02, 2012 4:00 PM
  Subject: Re: [Elecraft] K3 DNR


  Frank,

  Tap to turn on NR and turn off NR

  Whether NR is on or off, a HOLD (1 sec) the NR will bring up adjustment,
variable via VFO B

  There is no current facility to change the setting by SAVING it to a PF
key which was the original inquiry.

   I have not had a Yaesu in my shack since I discarded the FTdx9000D and I
thought that enough time had passed that Yaesu would have fixed that issue,
but, apparently not?

  I have never found a need to do this as I have had the K3 long enough to
get all my settings right. If a transceiver needs to have this adjusted
continuously during qso's then I sure don't one of those.  :-)

  YMMV

  73


  On 3 September 2012 08:23, W6NEK <w6nek at socal.rr.com> wrote:

    Gary,
    As I understand it, just a TAP of the NR button will toggle the NR
function On and Off.
    TAP & HOLD will place the NR into adjustment mode so the NR profile can
be changed.
    Fred asked: "is there a way to continuously adjust the DNR from the very
lowest to the most aggressive with a dial while listing"?
    As far as I know NR TAP & HOLD (NR ADJ) is the only way to accomplish
what he wants.

    Is there an easier way that I missed?
    73... Frank - W6NEK

    ----- Original Message -----
      From: Gary Gregory
      To: W6NEK
      Cc: elecraft at mailman.qth.net
      Sent: Sunday, September 02, 2012 2:28 PM
      Subject: Re: [Elecraft] K3 DNR


      Fred,

      Just a TAP of the NR is all that is needed. No need to HOLD

      73


      On 3 September 2012 02:57, W6NEK <w6nek at socal.rr.com> wrote:

        Hi Fred,
        I agree that the 15 step DNR control on the FT5000 is a very useful
and
        effective function.  To gain access to the K3 NR settings you need
to press
        and hold the NR button (NR ADJ).  The settings will appear in the
VFO B
        portion of the display.  There are a total of 32 noise reduction
steps with
        the first 16 tailored to CW mode (F1-1 thru F4-4) and the remaining
16
        tailored for SSB mode (F5-1 thru F8-4).  While not as convenient as
the
        variable NR setting on the FT5000, it's just as effective.  You can
read all
        about it on page 25 of the Operating Manual.

        73,
        Frank - W6NEK

        ----- Original Message -----
        From: "Fred Smith" <mfsj at mo-net.com>
        To: <elecraft at mailman.qth.net>
        Sent: Sunday, September 02, 2012 2:39 AM
        Subject: [Elecraft] K3 DNR


        <SNIP>
        > Being rather new to Elecraft I have only had my K3's for about a
month I'm
        > still searching for a way to continuously adjust the DNR from the
very
        > lowest to the most aggressive with a dial while listing. I'm able
to do
        > this
        > with my FTDX-5000 and find it to be one of my most used features
and most
        > effective I might add with that ability.
        >
        >
        >
        > Is there a way for me to setup a knob to adjust the DNR like that
in the
        > K3,
        > I'm sure there must be and it's just me not finding it, that good
of a
        > feature I'm sure would not be left out.
        > >
        > Thx to all & 73,
        >  Fred/N0AZZ

        ______________________________________________________________
        Elecraft mailing list
        Home: http://mailman.qth.net/mailman/listinfo/elecraft
        Help: http://mailman.qth.net/mmfaq.htm
        Post: mailto:Elecraft at mailman.qth.net

        This list hosted by: http://www.qsl.net
        Please help support this email list: http://www.qsl.net/donate.html




      --
      Gary
      Start the day off slow, then taper off.........
      K3 #679
      KPA500FT #18
      KAT500FT 007
      P3 #1629


      No virus found in this message.
      Checked by AVG - www.avg.com
      Version: 2012.0.2197 / Virus Database: 2437/5242 - Release Date:
09/02/12
    ______________________________________________________________
    Elecraft mailing list
    Home: http://mailman.qth.net/mailman/listinfo/elecraft
    Help: http://mailman.qth.net/mmfaq.htm
    Post: mailto:Elecraft at mailman.qth.net

    This list hosted by: http://www.qsl.net
    Please help support this email list: http://www.qsl.net/donate.html




  -- 
  Gary
  Start the day off slow, then taper off.........
  K3 #679
  KPA500FT #18
  KAT500FT 007
  P3 #1629


  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 2012.0.2197 / Virus Database: 2437/5242 - Release Date: 09/02/12
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5244 - Release Date: 09/02/12