[Elecraft] K3 DNR

[Gary Gregory]

*Fred,

Just a TAP of the NR is all that is needed. No need to HOLD

73
*
On 3 September 2012 02:57, W6NEK <w6nek at socal.rr.com> wrote:

> Hi Fred,
> I agree that the 15 step DNR control on the FT5000 is a very useful and
> effective function.  To gain access to the K3 NR settings you need to press
> and hold the NR button (NR ADJ).  The settings will appear in the VFO B
> portion of the display.  There are a total of 32 noise reduction steps with
> the first 16 tailored to CW mode (F1-1 thru F4-4) and the remaining 16
> tailored for SSB mode (F5-1 thru F8-4).  While not as convenient as the
> variable NR setting on the FT5000, it's just as effective.  You can read
> all
> about it on page 25 of the Operating Manual.
>
> 73,
> Frank - W6NEK
>
> ----- Original Message -----
> From: "Fred Smith" <mfsj at mo-net.com>
> To: <elecraft at mailman.qth.net>
> Sent: Sunday, September 02, 2012 2:39 AM
> Subject: [Elecraft] K3 DNR
>
>
> <SNIP>
> > Being rather new to Elecraft I have only had my K3's for about a month
> I'm
> > still searching for a way to continuously adjust the DNR from the very
> > lowest to the most aggressive with a dial while listing. I'm able to do
> > this
> > with my FTDX-5000 and find it to be one of my most used features and most
> > effective I might add with that ability.
> >
> >
> >
> > Is there a way for me to setup a knob to adjust the DNR like that in the
> > K3,
> > I'm sure there must be and it's just me not finding it, that good of a
> > feature I'm sure would not be left out.
> > >
> > Thx to all & 73,
> >  Fred/N0AZZ
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
*Gary*
*Start the day off slow, then taper off.........*
K3 #679
KPA500FT #18
KAT500FT 007
P3 #1629