[Elecraft] KX3/W1 Serial cable?

[Dick Dievendorff]

Your W1 serial cable should work fine with the KX3.  Some KX3 owners favor
right-angle plugs, but it should be OK if the straight-in works for you.

I used the same home brew cable for a number of years for development of
utilities for the W2, K144XV, KX3, XG3, and KAT500 until I upgraded to a
KXSER that has molded connectors.

These all use the same 3-wire TxD, RxD, ground connections with a 3.5mm TRS
plug.  Pinout is in your W1 manual.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of NZ8J
Sent: Saturday, September 01, 2012 10:13 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] KX3/W1 Serial cable?

I have a serial cable that I use on my W1 wattmeter but don't have a serial
cable with my KX3 (I got a USB cable with it).  Would the cable for the W1
work on the KX3. I would assume so, but assuming has occasionally got me in
trouble in the past.  :)

73
Tim
NZ8J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html