[Elecraft] SDR_Sound_Cards

[Joe Subich, W4TV]

> I am running mH Router + LP-Bridge + LP-PAN2 + NaP3 + N1MM + K3 +
> mAudio 2496, all with XP32 on a 2-core AMD 2.1Ghz machine that's a
> bit long in the tooth.

Which microHAM interface are you using?  With CW Keyer, Digikeyer,
Digikeyer II. microKEYER or microKEYER II you do not need LP-Bridge.
N1MM works with the primary CAT port and NaP3 can connect to the 2nd
CAT port.  This avoids some of the critical timing, load order issues
and reduces load on the processor.

73,

    ... Joe, W4TV


On 9/1/2012 9:41 AM, Robert G. Strickland wrote:
>
>
>    If you are
>> trying to run this on some old dog single or dual core setup with a 13 year
>> old OS like XP... well then good luck.
>
> I am running mH Router + LP-Bridge + LP-PAN2 + NaP3 + N1MM + K3 + mAudio 2496, all
> with XP32  on a 2-core AMD 2.1Ghz machine that's a bit long in the tooth. Getting all
> this going was a bit involved for sure. There are many parameters that need to be set
> just right, and the sequence of loading is somewhat critical. That aside, everything
> now runs flawlessly, and the pan display is super great. YMMV.
>
> ...robert
>