[Elecraft] KRX3 insatall

[Mike Reublin]

Thanks Wayne. All the settings look good. With the balance knob fully clockwise, the sub is in the right ear. Turning CCW, the main starts to be heard at 3:30.

73, Mike NF4L

On Oct 30, 2012, at 9:28 PM, Wayne Burdick <n6kr at elecraft.com> wrote:

> Mike,
> 
> The KRX3 should have the same overall gain as the K3's main receiver.
> 
> Try going into BSET Mode to see if the preamp is turned on on the sub receiver. You can also adjust other sub-RX settings in BSET mode, including NB, NR, and filter bandwidth, all of which can affect gain.
> 
> 73,
> Wayne
> N6KR
> 
> On Oct 30, 2012, at 5:48 PM, Mike Reublin wrote:
> 
>> The KRX3 is installed and working! Time was 5 1/2 hours including configuration. Usual outstanding fit and instructions.
>> 
>> I installed it to use the ATU for aux, and I put the BNC in if I ever want to change.
>> 
>> I have it set to use the SUB AF control as balance.
>> 
>> FIrst impression listening to one station working up 1 on 30M:
>> The KRX3 has a noticeably lower volume.
>> 
>> And I found out my speakers and headphones are opposite (left/right) to each other...😥
>> 
>> Mike, NF4L
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>