[Elecraft] KXPD3 APPLICATION NOTE UPGRADE SHEET TYPOS

Ron D'Eau Claire ron at cobi.biz
Sun Oct 28 22:57:14 EDT 2012


You are looking at two different KXPD3 documents, Kent.

Earlier KXPD3 all had the "firm" spring by default. After initial shipments
and customer feedback, it was decided to build KXPD3s with the "medium"
spring and include a firmer and lighter spring so the feel could be adjusted
by changing springs.
 
For those who already had KXPD3s with the firm spring, an upgrade kit was
created that is documented by the KXPD3 UPGRADE KIT manual. That kit
contained a medium and light spring for them to use for a lighter feel.

That's why the upgrade kit document is a few days newer the original KXPD3
document. 

At the same time as the springs were changed, improved contacts were phased
into the KXPD3. The new contacts are also included in the upgrade kit for
those who had the early KXPD3s. 

If you got a KXPD3 with three springs, you do not need the upgrade kit. 

If you have an earlier KXPD3 and the upgrade kit, your key is now the same
as  current production. 

 73, Ron AC7AC



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of KENT TRIMBLE, K9ZTV
Sent: Sunday, October 28, 2012 5:10 PM
To: parts at elecraft.com
Cc: Elecraft
Subject: [Elecraft] KXPD3 APPLICATION NOTE UPGRADE SHEET TYPOS

Gents. . .

Reference Instruction Sheet supplied with KXPD3 upgrade kit, Revision B1,
September 24, 2012:

1)  Firstparagraph, second to last sentence reads, "The original spring is
the stiffest." It should read "The original spring is the medium
strengthspring."

2) Bottom of page 1, the Parts Supplied box shows the Light Spring as Part
No. E980236. The Light Spring is actually Part No. E980239.

3)  Bottom of page 1, the Parts Supplied box shows "Spring, Medium" Part No.
E980240. It should read "Spring, Firm" Part No. E980218.

4) Everyone should note, however, that KXPD3 PADDLE INSTRUCTION, REVISION D,
9/21/2012 (3 days earlierbut 2 revisions later!) on the website in .pdf
format DOES contain the correct information regarding springsand
partnumbers.

73,

Kent K9ZTV
Jefferson City, MO


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



More information about the Elecraft mailing list