[Elecraft] [K2] POWER control has no effect on actual transmit power

[Don Wilhelm]

Ben,

You are in for some Transmit Signal Tracing.  Turn to appendix A in the 
K2 manual and do the steps indicated there.

73,
Don W3FPR

On 10/27/2012 7:44 PM, Ben Byer wrote:
> I've had fun putting together K2 #7373, and am finally at the point of doing the 40-Meter Transmitter Alignment (manual, p.78).   I have the unit connected to a 50-ohm dummy load, and am trying to tune L1 and L2 to show 2W on the internal wattmeter.   When I press TUNE, the measured power ranges from 0.2W-0.4W.
>