[Elecraft] K1 capacitor ID help

[dean at jonemail.com]

Hi Don,
     Thanks for answering.  The type of capacitor you are describing is
like the ones that I mounted on the four band module.  Those do have a
round body with a flat SIDE to it.  These capacitors are completely
round but have a little square extension on one end.  For lack of a
better description, they kind of look like a banjo would look like if
you cut the instrument's neck off close to the banjo's body.  The round
portion has a contact and the end of the cut-off neck has a contact. 
The body is ceramic and not plastic like the ones on the four band
module.  I hope this description can help you paint a picture in your
mind to help explain what I have here.

Dean





Dean,

Look carefully, one side has rounded corners while the other side has 
angular corners (even though it is smaller). The flat side is the one 
with the angular corners.

73,
Don W3FPR

On 10/27/2012 6:41 PM, dean at jonemail.com wrote:
> Hi all,
> I am installing trimmer caps C13 and C20 on the RF board and having
> trouble identifing which way they need to be installed. They are
> physically different than the discription in the manual. There is NO
> flattened side to them. They look like a round body that has a square
> tab extending on one side. Is this square tab the equivalent of the
> flattened end? Thanks for any help.
>