[Elecraft] Info 080 message started with RF Alignment and Test, Part II

[Don Wilhelm]

The K2 will not change bands while in CAL FCTR.  If you attempt to do 
that, the result will be the frequency created when the output of the 
DAC is at zero volts (assuming you tapped the BAND- button), and if you 
tapped the BAND+ button, the frequency will be that which is produced 
when the DAC voltage is at its highest.

73,
Don W3FPR

On 10/27/2012 1:59 PM, AC8HU wrote:
> I still really lean towards the fact that the problem reappeared at the
> exact same point, down to the precise button press (switching to 80 meters
> while in CAL FCTr), suggesting that there's a problem with a component.  It
> just seems that since the problem didn't appear randomly along the way but
> at the same exact moment, it wouldn't just be a solder connection.  A poor
> solder connection would be prone to going out at any moment and the odds of
> it doing it the exact same time?
>