[Elecraft] KX3

[David Holton]

Thank you all, Issue has now been resolved.
Many thanks for all the replies.

David 
VK4DH

-----Original Message-----
From: Matt Zilmer [mailto:mzilmer at verizon.net] 
Sent: Tuesday, 23 October 2012 3:03 PM
To: David Holton
Cc: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] KX3

Try enabling VFO NR in the menu.  You'll have to unlock to do this.

Dial up the VFO NR menu entry, then hold the KHZ key down until the lock
icon disappears.  Use VFO to change the setting from OFF to ON.
Exit the menu.

matt W6NIA

On Tue, 23 Oct 2012 12:06:04 +1000, you wrote:

>HI All
>
>I have a KX3, #262. 
>
>I have an issue and I wonder if others have found the same, It's in 
>relation to the ENCODER.
>
> 
>
>There is a distinct noise as you turn the tuning knob and it is seems 
>to be frequency sensitive.
>
> 
>
>On the Bands from 1.8 to 10MHz there is No noise.
>
>On the Bands from 14 to 21MHz there is Light " rasping " noise.
>
>On the Bands 24MHz and 28MHz the noise Doubles to Medium.
>
>On the 50MHZ the rasping noise is double that on 28MHz and is Very
annoying.
>
> 
>
>The encoder I have in my KX3 is the one which is not soldered to the PC 
>Board.
>
>Anyone else have these symptoms?
>
> 
>
>David,
>
>VK4DH
>
> 
>
> 
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net Please help support this email 
>list: http://www.qsl.net/donate.html