[Elecraft] 2m Transverter

[John D'Ausilio]

actually, you *could* do it without the KXV3(A) .. just configure the
XV144 for high-level common IF and run it with a watt or two  ;)

de w1rt/john

On Sun, Oct 21, 2012 at 10:33 AM, David Pratt <david at g4dmp.fsnet.co.uk> wrote:
> Hello Dave -
>
> What I omitted to say in my msg on the reflector was that you WILL need
> the KXV3 installed in your K3.  When I mentioned not needing the KXV3A I
> was making an assumption that your K3 already has the original KXV3
> installed. Apart from the power cable the only additional cables you
> will need are a pair of BNC-BNC cables to connect the XV144 to the K3.
> You can drive the K3 with just 1mW of power from the XV144.
>
> I hope that helps.
>
> 73 de David G4DMP
>
> --
>  + - - - - - - - - - - - - - - - - +
>  | David M Pratt, Kippax, Leeds.   |
>  | Website: http://www.g4dmp.co.uk |
>  + - - - - - - - - - - - - - - - - +
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html