[Elecraft] 2m Transverter

[Dave Buchanan]

Hi David,

Thanks for the response. This is exactly the kind of information which is helpful. 
And you're right. I misspoke, cannot use a 2m repeater for transmitting cw but I have an external keyer which
will generate the tones so can hold down the ptt on the K3 and transmit that way. 
 
73, 


Dave


________________________________
 From: David Pratt <david at g4dmp.fsnet.co.uk>
To: Dave Buchanan <kf5str at yahoo.com>; elecraft at mailman.qth.net 
Sent: Sunday, October 21, 2012 9:33 AM
Subject: 2m Transverter
 
Hello Dave -

What I omitted to say in my msg on the reflector was that you WILL need
the KXV3 installed in your K3.  When I mentioned not needing the KXV3A I
was making an assumption that your K3 already has the original KXV3
installed. Apart from the power cable the only additional cables you
will need are a pair of BNC-BNC cables to connect the XV144 to the K3.
You can drive the K3 with just 1mW of power from the XV144.

I hope that helps.

73 de David G4DMP

-- 
+ - - - - - - - - - - - - - - - - +
| David M Pratt, Kippax, Leeds.   |
| Website: http://www.g4dmp.co.uk |
+ - - - - - - - - - - - - - - - - +