[Elecraft] KXV3 ant RX protection [K3]

[Don Wilhelm]

Luca,

That is not done internally in the K3.  If that is a problem for you 
(you do not have adequate isolation between your TX antenna and the 
beverage), you will have to add that protection externally. Switching 
the RX antenna input to a dummy load during transmit should do the job 
nicely.

73,
Don W3FPR

On 10/19/2012 4:41 PM, Luca NCJ wrote:
> Hi all,
> need to be cleared on one issue.
>
> Scenario:
>
> Ant 1 (or 2) connected to TX antenna
> KXV3 ant RX IN connected to an RX system (i.e. a beverage)
>
> is there any setting to avoid RF from TX antenna returning into the RX IN
> module while transmitting?
> For example a menu that allows to disconnect the RX antenna when the PTT is
> pressed for TX-ing?
>
> TNX in advance
>