[Elecraft] Vedr: Resistor networks, polarized?

[Martin Storli - LA8OKA]

You can remove the resistor pack by using heated solder on all the pins on one side. (You need to be fast!)
Heat up one side with the soldering iron and apply lot of solder, the solder works as a heat distributor, losen one side, and do the same on the other side, use solder wick after to remove all the solder from the PCB and the resistor pack.

Martin Storli 
LA8OKA
Oslo, Norway 
 
ARCTICPEAK's Radio pages! 
http://www.arcticpeak.com/radio.htm
 

________________________________
 Fra: Gil G. <gil at keskydee.com>
Til: Elecraft at mailman.qth.net 
Sendt: Fredag, 19. oktober 2012 1.35
Emne: [Elecraft] Resistor networks, polarized?
  
Hello,

I am building the KSB2 tonight, and I put a resistor network the wrong way..
Aren't these just resistors? Why would there be a pin 1? Should I remove it?
If so, how do I do that? I have solder wick, tried, but it isn't budging…

Thanks,

Gil.
--
PGP Key: http://keskydee.com/gil.asc

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net/
Please help support this email list: http://www.qsl.net/donate.html