[Elecraft] KX3 Question, Transmit Test Mode

[Don Wilhelm]

Don, Phil,

While that is true, I strongly recommend that you connect a dummy load 
as well.  "Stuff" can happen, and Murphy says it will, so protect your 
KX3 by connecting the dummy load even if it is not technically 
necessarily required.

73,
Don W3FPR

On 10/18/2012 4:04 PM, Don Butler wrote:
> Phil, I believe you can replicate the K3's test mode on the KX3 by adjusting
> the power level down to 0.0 W
>
> Don, N5LZ
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Phil Hystad
> Sent: Thursday, October 18, 2012 1:34 PM
> To: elecraft at mailman.qth.net List
> Subject: [Elecraft] KX3 Question, Transmit Test Mode
>
> I am a new owner of a KX3 and it seems to me that the K3 feature, TEST for
> XMIT, is not supported on the KX3.  I was going to use it to adjust mic gain
> and also VOX controls for KX3 transmit.
>
> So, just for confirmation, this feature does not exist or is it well hidden?
>
> 73, phil, K7PEH
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>