[Elecraft] KX3 Question, Transmit Test Mode

[Andrew Moore]

For CW practice on the KX3, can't you just hold VOX to put the rig in PTT
mode, to effectively disable the TX? (toggle it back to VOX to enable the
TX)

--Andrew, NV1B


On Thu, Oct 18, 2012 at 4:07 PM, Wayne Burdick <n6kr at elecraft.com> wrote:

> This feature isn't supported on the KX3 at present. However, you can
> set power to a low level, switch to ALC/CMP metering by tapping the
> KEYER/MIC knob, then adjust mic controls.
>
> 73,
> Wayne
> N6KR
>
>
> On Oct 18, 2012, at 12:34 PM, Phil Hystad wrote:
>
> > I am a new owner of a KX3 and it seems to me that the K3 feature,
> > TEST for XMIT, is not supported on the KX3.  I was going to use it
> > to adjust mic gain and also VOX controls for KX3 transmit.
> >
> > So, just for confirmation, this feature does not exist or is it well
> > hidden?
> >
> > 73, phil, K7PEH
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>