[Elecraft] K3 RS232 Query

[john petters]

Hi folks,
I made up a serial lead today to run from a window 2k computer which has
a serial port. I've been using a Prolific USB / RS232 converter, which
is very noisy. This, however connects to the K3 using HRD software and
works correctly.
The lead I made up uses 3 wires as the K3 manual suggests. There is no
crossover. HRD will not see the K3.
I tested the lead by connecting the USB converter to it and it worked
perfectly with the new lead - so I don't think my lead is the problem. I
tried all the available com ports (the USB lead works on Com 8) the
RS232 should be on Com 1 or Com 2. Any suggestions?
73
-- 
John Petters
www.traditional-jazz.com
Amateur Radio Station G3YPZ