[Elecraft] KXBC3 install ?

[Phil Hystad]

Mark,

I believe that the parts list errata for the KXBC3 is wrong.  Those are supposed to be flat head screws.  I submitted an error correction on Friday to Elecraft and got an acknowledgement.  Other then that, I did not find anything awry from the regular assembly instructions.

phil
K7PEH

On Oct 14, 2012, at 10:53 AM, Mark Hogan <ml.hogan at gmail.com> wrote:

> The 2-56 screw that I took off the battery retainer, is that the same screw I use to hold in th KXBC3 and do I reuse that spacer? If not I must have the wrong screw in my parts kit. I have two 4-40 by 3/16 and a very tiny 3/16 pan head that does not screw into anything.
> 
> Mark Hogan
> N5OBC
>