[Elecraft] K3 Data Modes using SignaLink USB

[Don Wilhelm]

Greg,

You are absolutely correct, but other than a general post to the 
Elecraft reflector, I do not know how to reach the many K2/K3 users who 
do not monitor this reflector and want to try out data modes. The 
information that the "K2/K3 is different" does not seem to appear in the 
lists of data mode Google searches.

73,
Don W3FPR

On 10/12/2012 11:34 PM, Greg wrote:
> I agree...this comes up too often and is vital to the proper operation of
> data modes.
> On Oct 12, 2012 8:32 PM, "Don Wilhelm" <w3fpr at embarqmail.com> wrote:
>
>> Greg,
>>
>> I would like this to be set into the manual that the K3 is different than
>> the conventional wisdom given on the internet.  The instructions in the K3
>> manual for data modes is to be followed if the expected levels and power
>> settings ae to be obtained.
>>
>> 73,
>> Don W3FPR
>>
>> On 10/12/2012 11:20 PM, Greg wrote:
>>
>>> Absolutely.  The K3 Alc is integral to its power regulation and needs to
>>> be
>>> set for 4 bars of ALC with the fifth bar flickering.  This is also
>>> explained in the K3 operating tips.
>>>
>>> 73
>>> Greg
>>> AB7R
>>>
>>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>