[Elecraft] K3 Data Modes using SignaLink USB

[Don Wilhelm]

Greg,

I would like this to be set into the manual that the K3 is different 
than the conventional wisdom given on the internet.  The instructions in 
the K3 manual for data modes is to be followed if the expected levels 
and power settings ae to be obtained.

73,
Don W3FPR

On 10/12/2012 11:20 PM, Greg wrote:
> Absolutely.  The K3 Alc is integral to its power regulation and needs to be
> set for 4 bars of ALC with the fifth bar flickering.  This is also
> explained in the K3 operating tips.
>
> 73
> Greg
> AB7R
>