[Elecraft] KAT500 cable

[Gary Gregory]

*Off the Elercaft order page:


**E850463* *Optional KAT500 to KPA500 Cable*

KAT500 to KPA500 cable. Provides band data to KAT500 for band change prior
to TX,, and feeds through KPAK3AUX cable data from the K3 to the KPA500.
Typically used in addition to the KPAK3AUX cable from the K3 to route band
data, keying and AUXBUS data through the KAT500 to the KPA500. (The KAT500
has AUX Cable IN and OUT connections.)

This is the same 15 pin cable as is contained in the KPAP3AUX cable set
(see above, under the KPA500). That set also includes a Y cable expansion
adapter and a TX line keying interrupt adapter for the K3 to KPA500 link.


Seems like a reasonable price or roll your own as they say....


:-)

 *24.95*
On 9 October 2012 20:58, k5oai <k5oai.sam at gmail.com> wrote:

> Now how about a cable for the rest of us K3 users that don't have a KPA500
> and just need a cable from the K3 to the KAT500?
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/KAT500-cable-tp7563858p7563882.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
*Gary*
*Start the day off slow, then taper off.........*
K3 #679
KPA500FT #18
KAT500FT 007
P3 #1629