[Elecraft] ] Elecraft] KPA500 to K3 control cable

[David Robertson]

Jim,
The cable Elecraft sells is of top quality but is only 3 feet long. If that
length is ok then get it. If you need longer cable you can build it. The
schematic is in either the KPA500 construction or operation manual ( I
think it is in the construction manual).

You need 2, 15 pin HD D connectors ( Male type ) and an old parallel
printer cable or a old RS232 cable with DB 25 connectors at each end. It
took me about 20 minutes to build mine after rounding up the parts. I made
mine 5 feet in length which was just right for my station.

73

Dave KD1NA