[Elecraft] KAT500

[iain macdonnell - N6ML]

On Sat, Oct 6, 2012 at 3:34 AM, Oliver Dröse <droese at necg.de> wrote:
> As far as I know AUXBUS just works one way (see the K3/KPA500 integration). Otherwise there would not be any need for the BCD data from K3 to KPA500/KAT500, would it? ;-)

The KPA500 can only act as an AUXBUS sender, but the KAT500 is capable
of both send and receive, as is the K3.

Both KPA500 and KAT500 include "BCD" inputs to support non-Elecraft
transceivers.

73,

    ~iain / N6ML



>   ----- Original Message -----
>   From: Jim Miller
>   To: Oliver Dröse
>   Cc: elecraft at mailman.qth.net List
>   Sent: Saturday, October 06, 2012 11:47 AM
>   Subject: Re: [Elecraft] KAT500
>
>
>   AUXBUS
>
>
>   On Sat, Oct 6, 2012 at 5:11 AM, Oliver Dröse <droese at necg.de> wrote:
>
>     Antenna selection yes, memory no. How shall the tuner know which frequency
>     you are tuned to and which memories it should recall?
>
>
>   E-Mail ist virenfrei.
>   Von AVG überprüft - www.avg.de
>   Version: 2012.0.2221 / Virendatenbank: 2441/5311 - Ausgabedatum: 05.10.2012
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html