[Elecraft] K2 no audio output on Part I Test

[Mario Bouchard]

Don,

Thanks for indicating the right order of the pins, I had measured the wrong ones, rookie mistake I guess.

I just measured the voltage on J8 #7, #8 and #10, all have the same voltage, 5.2V.

I guess that's good, yes?


Mario Bouchard,

Envoyé de mon iPad
Sent from my iPad

On 2012-10-04, at 19:28, Don Wilhelm <w3fpr at embarqmail.com> wrote:

> Are you counting properly?  Pins 7, 8, and 10 are connected together according to the schematic.
> The pins on one side are numbered 1, 3, 5, 7, etc. while the pins on the other side are even numbers 2, 4, 6, 8, etc.
> 
> 73,
> Don W3FPR
> 
> On 10/4/2012 6:03 PM, VA2AAE wrote:
>> Don,
>> 
>> Thanks for the reply,
>> 
>> I checked on P3 #7 and #8, both have 5V, #10 has close to nothing (1.4mV)
>> ???
>> 
>> I checked on J8 #7 and #8, both have 5V, #10 has close to nothing (1.4mV)
>> ???
>> 
>> U9 #2 and #3 have 1.4mV, #6 has 6.5V has 13.6V.
>> 
>> 
>> 
>> 
>> 
>> -----
>> Thanks,
>> 
>> 73's
>> 
>> Mario.
>> --
>> View this message in context: http://elecraft.365791.n2.nabble.com/K2-no-audio-output-on-Part-I-Test-tp7563701p7563705.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>