[Elecraft] K3 Hi SWR when sending CW

[Mike]

Barry,

I doubt your choke has anywhere near the inductance needed to do the 
job. I think a careful read of the paper you reference will show what 
you need to do.

73, Mike NF4L

On 10/3/12 7:50 PM, Barry wrote:
> I set up a common mode choke with 3 turns of coax through 2 ferrites, similar
> to the figure 2 on p. 18 of this document:
> http://www.yccc.org/Articles/W1HIS/CommonModeChokesW1HIS2006Apr06.pdf
> I placed it outside, near the feedpoint.  it did not change anything.
>
> Geoff, I have 20-25 ft of coax outside and about 15 feet inside.
>
> Barry W2UP
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-Hi-SWR-when-sending-CW-tp7563645p7563674.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>