[Elecraft] K3 Hi SWR when sending CW

[Vic K2VCO]

I am not sure. But try it where it's convenient. Remember, for it to be effective at HF, 
you must have a few turns around a ferrite -- I'd say 4 or 5 turns should be enough for 
12m. Just clamping a ferrite bead on a cable doesn't do much.

On 10/3/2012 10:11 AM, Barry wrote:
> Vic,
>
> I think you're on to something.  When I vary the power, below 85W, the SWR
> is 1:1.  Above 85W, it starts creeping up with the power increase.
>
> If I put some ferrites on the coax, but want to keep them indoors, is there
> a best location for them?
>
> Tnx,
> Barry W2UP


-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/