[Elecraft] [K2] KSB2 with Icom HM-12?

[Bill K9YEQ]

Gil,

 

This does require mic bias.  The manual will help you set the bias. Good
luck.

 

73,

Bill

K9YEQ

 

From: Gil G. [mailto:gil at keskydee.com] 
Sent: Tuesday, October 02, 2012 8:55 PM
To: Bill K9YEQ
Subject: Re: [Elecraft] [K2] KSB2 with Icom HM-12?

 

Thank you, that will save me $60...


Gil AK4YH.

--

PGP Key: http://keskydee.com/gil.asc

 

On Oct 2, 2012, at 8:43 PM, Bill K9YEQ wrote:





I believe that is the one I am using.  There are no markings but I ordered
direct from Bob Heil.  It has the full and DX positions on the mic.  I
currently use the HM-ic mic on a desk stand.  Audio reports are good after I
set up with some local hams using the xmit equalizer on both mics.

73,
Bill
K9YEQ


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Gil G.
Sent: Tuesday, October 02, 2012 7:11 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] [K2] KSB2 with Icom HM-12?

Hello,

Has anyone used the K2 on SSB with an Icom HM-12 microphone, and if so, how
did it work?
Would the HM-12 be a good choice? (Since I already have one.)

Thanks,

Gil.
--
PGP Key: http://keskydee.com/gil.asc

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html