[Elecraft] K3 Sub RX FIXED!!

[Fred Smith]

Mike

Sounds like you did a fine job of figuring that out sometimes those little
things can cause you the most problems and take the most time. Now learning
the operation of how to use it fully is an issue for another day.

See ya in the pileups!

73,
Fred/N0AZZ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Mike Sanders
Sent: Wednesday, November 28, 2012 9:12 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 Sub RX FIXED!!

Thanks everyone for the replies. They were much appreciated. What I found
was I did not have the filter on/off selections made and per mode to boot.
It was easy to do in the config FLx on menu. But you do have to do it for
all modes including LSB and USB.

Also, please note that I did manage to turn on FL2 and FL4 only for the sub
RX. The Main has all 5 slots turned on and working.
Now the Sub RX is working great and I am satisfied with the results.
Now to test it out in some pileups............Thanks again All.
73


                        Mike Sanders
                             KØAZ



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html